PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S94
S94 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SWITCH,THERMOSTATIC is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.109 INCHES NOMINAL IN, hole_diameter: 1.016 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, terminal_type: TAB W/SCREW, overall_height: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-276-3480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S94
NSN: 5310-00-276-3480
FSC: 5310
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.109 INCHES NOMINAL IN
hole_diameter1.016 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
terminal_typeTAB W/SCREW
overall_height0.750 INCHES NOMINAL IN
overall_length1.688 INCHES NOMINAL IN
mounting_methodBASE
overall_diameter1.688 INCHES NOMINAL IN
contact_adjustabilityACTUATION POINT NOT ADJUSTABLE
operating_temp_rating-273.1 CELSIUS MINIMUM AND 650.0 FAHRENHEIT MAXIMUM DEGC
peripheral_shape_styleROUND
NSN5310-00-276-3480
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S94 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 1.016 INCHES NOMINAL IN
•
THICKNESS: 0.109 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OVERALL DIAMETER: 1.688 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE SHAPE STYLEROUND
MATERIALSTEEL OVERALL
HOLE DIAMETER1.016 INCHES NOMINAL IN
THICKNESS0.109 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OVERALL DIAMETER1.688 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
M13067Interchangeable
interchangeable cross-reference
interchangeable
M13069Interchangeable
interchangeable cross-reference
interchangeable
S94Interchangeable
interchangeable cross-reference
interchangeable
60-003Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S94?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S94?
S94 is a SWITCH,THERMOSTATIC.
What parts can replace S94?
There are 4 known substitutes for S94: M13067, M13069, S94 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S94?
S94 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-276-3480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S94

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026