PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S93752
S93752 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.375 INCHES NOMINAL IN, overall_length: 5.875 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-068-1907, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S93752
NSN: 5330-01-068-1907
FSC: 5330
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.375 INCHES NOMINAL IN
overall_length5.875 INCHES NOMINAL IN
bolt_hole_quantity4
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-01-068-1907
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S93752 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 4
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH3.375 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL LENGTH5.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
SCB69637Interchangeable
interchangeable cross-reference
interchangeable
50458Interchangeable
interchangeable cross-reference
interchangeable
37649Interchangeable
interchangeable cross-reference
interchangeable
1683-009-2Interchangeable
interchangeable cross-reference
interchangeable
FP1368NInterchangeable
interchangeable cross-reference
interchangeable
P612Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S93752?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S93752?
S93752 is a GASKET.
What parts can replace S93752?
There are 12 known substitutes for S93752: SCB69637, 50458, 37649 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S93752?
S93752 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-068-1907. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S93752

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026