PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S93708
S93708 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: COPPER RETAINER, construction: TWO-PIECE, outside_diameter: 0.812 INCHES NOMINAL IN, retainer_thickness: 0.156 INCHES NOMINAL IN, packing_inside_diameter: 0.312 INCHES NOMINAL IN, retainer_inside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-067-7075, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S93708
NSN: 5330-01-067-7075
FSC: 5330
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialCOPPER RETAINER
constructionTWO-PIECE
outside_diameter0.812 INCHES NOMINAL IN
retainer_thickness0.156 INCHES NOMINAL IN
packing_inside_diameter0.312 INCHES NOMINAL IN
retainer_inside_diameter0.500 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.656 INCHES NOMINAL IN
NSN5330-01-067-7075
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S93708 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: COPPER RETAINER
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.656 INCHES NOMINAL IN
•
CONSTRUCTION: TWO-PIECE
•
PACKING INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
RETAINER THICKNESS: 0.156 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER INSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIALCOPPER RETAINER
PACKING RING CROSS-SECTIONAL DIAMETER0.656 INCHES NOMINAL IN
CONSTRUCTIONTWO-PIECE
PACKING INSIDE DIAMETER0.312 INCHES NOMINAL IN
RETAINER THICKNESS0.156 INCHES NOMINAL IN
OUTSIDE DIAMETER0.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
WI50392Interchangeable
interchangeable cross-reference
interchangeable
50392Interchangeable
interchangeable cross-reference
interchangeable
26048Interchangeable
interchangeable cross-reference
interchangeable
SC-B-70020Interchangeable
interchangeable cross-reference
interchangeable
503-1274Interchangeable
interchangeable cross-reference
interchangeable
8331627Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S93708?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S93708?
S93708 is a PACKING WITH RETAINER.
What parts can replace S93708?
There are 8 known substitutes for S93708: WI50392, 50392, 26048 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S93708?
S93708 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-067-7075. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S93708

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026