PartsTable
Technical Data Sheet
PartsTable / O-RING / S9233-DS-MMC-010 FIG 7-50 IT #62
S9233-DS-MMC-010 FIG 7-50 IT #62 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The S9233-DS-MMC-010 FIG 7-50 IT #62 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-172-7223, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S9233-DS-MMC-010 FIG 7-50 IT #62
NSN: 5331-00-172-7223
FSC: 5331 — O-RING
CAGE: A0106 — ISOTTA FRASCHINI MOTORI SPA (ITA)
SPECIFICATIONS
Part NumberS9233-DS-MMC-010 FIG 7-50 IT #62
NSN5331-00-172-7223
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S9233-DS-MMC-010 FIG 7-50 IT #62 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 331 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER3.730 INCHES MINIMUM AND 3.794 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
ELONGATION PERCENTAGE331 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AM3227Interchangeable
interchangeable cross-reference
interchangeable
AS568-238Interchangeable
interchangeable cross-reference
interchangeable
58094Interchangeable
interchangeable cross-reference
interchangeable
D2000-05 2BG715E034EF11EF21F1Interchangeable
interchangeable cross-reference
interchangeable
400-221P42Interchangeable
interchangeable cross-reference
interchangeable
7-754-000096Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S9233-DS-MMC-010 FIG 7-50 IT #62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S9233-DS-MMC-010 FIG 7-50 IT #62?
S9233-DS-MMC-010 FIG 7-50 IT #62 is a S9233-DS-MMC-010 FIG 7-50 IT #62.
What parts can replace S9233-DS-MMC-010 FIG 7-50 IT #62?
There are 18 known substitutes for S9233-DS-MMC-010 FIG 7-50 IT #62: AM3227, AS568-238, 58094 and 15 more. Substitute compatibility should be verified for your specific system.
Is S9233-DS-MMC-010 FIG 7-50 IT #62 still available?
S9233-DS-MMC-010 FIG 7-50 IT #62 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S9233-DS-MMC-010 FIG 7-50 IT #62

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026