PartsTable
Technical Data Sheet
Download PDF

S9112-08-035 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S9112-08-035: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1095 OVERALL, hole_diameter: 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN, overall_height: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, hardness_rating: 47.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN, style_designator: SPRING TENSION. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-959-6872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S9112-08-035
NSN: 5310-00-959-6872
FSC: 5310 — Nuts and Washers
CAGE: 10639 — AVIONICS SPECIALTIES, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1095 OVERALL
hole_diameter0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
overall_height0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
hardness_rating47.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
style_designatorSPRING TENSION
surface_treatmentCADMIUM OVERALL
material_thickness0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-959-6872
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S9112-08-035 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 47.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPRING TENSION
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING47.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPRING TENSION
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
MATERIAL THICKNESS0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1095 OVERALL
HOLE DIAMETER0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
WB3587Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
08H35Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S9112-08-035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S9112-08-035?
S9112-08-035 is a WASHER,SPRING TENSION.
What parts can replace S9112-08-035?
There are 2 known substitutes for S9112-08-035: WB3587, 08H35. Substitute compatibility should be verified for your specific system.
What is the NSN for S9112-08-035?
S9112-08-035 is cataloged in the U.S. Government catalog under NSN 5310-00-959-6872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S9112-08-035

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.