PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S9046
S9046 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The TIE ROD END,STEERING is a the manufacturer industrial component. Key specifications include ball_stud: INCLUDED, design_type: BALL STUD, thread_size: 1/2-20, taper_length: 0.672 INCHES NOMINAL IN, thread_length: 0.625 INCHES NOMINAL IN, special_features: SECOND DESIGN TYPE,SOCKET. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-540-4660, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S9046
NSN: 3110-00-540-4660
FSC: 3110
CAGE: 16859 — CRANE CO DBA CRANE-DEMING PUMPS DIVISION DIV DEMING PUMPS (USA)
SPECIFICATIONS
ball_studINCLUDED
design_typeBALL STUD
thread_size1/2-20
taper_length0.672 INCHES NOMINAL IN
thread_length0.625 INCHES NOMINAL IN
special_featuresSECOND DESIGN TYPE,SOCKET
thread_directionRIGHT-HAND
locking_clamp_typeSEPARATE
spherical_diameter1.063 INCHES NOMINAL IN
removability_featureNOT INCLUDED
body_thickness_at_pivot_hole1.032 INCHES NOMINAL IN
rod_connecting_end_thread_size11/16-18
NSN3110-00-540-4660
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S9046 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
BEARING SEAL TYPE: LABYRINTH
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
OUTER RING WIDTH: 0.6300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
BEARING SEAL TYPELABYRINTH
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.7870 INCHES NOMINAL IN
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
OUTER RING WIDTH0.6300 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
SCD3385Interchangeable
interchangeable cross-reference
interchangeable
766A1Interchangeable
interchangeable cross-reference
interchangeable
FL30Interchangeable
interchangeable cross-reference
interchangeable
427235Interchangeable
interchangeable cross-reference
interchangeable
5306000427235Interchangeable
interchangeable cross-reference
interchangeable
017-45001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S9046?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S9046?
S9046 is a TIE ROD END,STEERING.
What parts can replace S9046?
There are 33 known substitutes for S9046: SCD3385, 766A1, FL30 and 30 more. Substitute compatibility should be verified for your specific system.
Is S9046 still available?
S9046 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S9046

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026