PartsTable
Technical Data Sheet
Download PDF

S9026M132 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S9026M132: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, temp_rating: -94.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, outside_diameter: 1.943 INCHES NOMINAL IN, center_hole_diameter: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN, elongation_percentage: 350 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-182-3054, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S9026M132
NSN: 5331-00-182-3054
FSC: 5331 — O-ring
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialRUBBER
temp_rating-94.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
outside_diameter1.943 INCHES NOMINAL IN
center_hole_diameter1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
elongation_percentage350 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-182-3054
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S9026M132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -94.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.943 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 350 MAXIMUM
•
CENTER HOLE DIAMETER: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
TEMP RATING-94.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.943 INCHES NOMINAL IN
ELONGATION PERCENTAGE350 MAXIMUM
CENTER HOLE DIAMETER1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 2
A-A-59588 CL 3B GR 70Reference document
Same NSN cross-reference
Reference document — Identification reference
AS568-132Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S9026M132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S9026M132?
S9026M132 is a O-RING.
What parts can replace S9026M132?
There are 2 known substitutes for S9026M132: A-A-59588 CL 3B GR 70, AS568-132. Substitute compatibility should be verified for your specific system.
What is the NSN for S9026M132?
S9026M132 is cataloged in the U.S. Government catalog under NSN 5331-00-182-3054. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S9026M132

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.