PartsTable
Technical Data Sheet
PartsTable / O-RING / S9026L011
S9026L011 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-253-4972, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S9026L011
NSN: 5331-00-253-4972
FSC: 5331 — O-RING
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
NSN5331-00-253-4972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S9026L011 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
M83248/1-011Interchangeable
interchangeable cross-reference
interchangeable
10017039Interchangeable
interchangeable cross-reference
interchangeable
10017001Interchangeable
interchangeable cross-reference
interchangeable
S8057AP6Interchangeable
interchangeable cross-reference
interchangeable
S9005E11Interchangeable
interchangeable cross-reference
interchangeable
5331PL0163124Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S9026L011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S9026L011?
S9026L011 is a O-RING.
What parts can replace S9026L011?
There are 7 known substitutes for S9026L011: M83248/1-011, 10017039, 10017001 and 4 more. Substitute compatibility should be verified for your specific system.
Is S9026L011 still available?
S9026L011 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S9026L011

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026