PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S8KDDMILG3278A
S8KDDMILG3278A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.4375 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-9091, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8KDDMILG3278A
NSN: 3110-00-293-9091
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.4375 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter1.6250 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-293-9091
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S8KDDMILG3278A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
RETAINER FABRICATION METHOD: PRESSED
•
SHIELD QUANTITY: 2
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
RETAINER FABRICATION METHODPRESSED
SHIELD QUANTITY2
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
Z99R3XRCJ3Interchangeable
interchangeable cross-reference
interchangeable
R3ZZQ5A7MILG3278AInterchangeable
interchangeable cross-reference
interchangeable
4131103&4A1A&SInterchangeable
interchangeable cross-reference
interchangeable
STD176Interchangeable
interchangeable cross-reference
interchangeable
AN805-2Interchangeable
interchangeable cross-reference
interchangeable
R2SXA7YInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S8KDDMILG3278A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8KDDMILG3278A?
S8KDDMILG3278A is a BEARING,BALL,ANNULAR.
What parts can replace S8KDDMILG3278A?
There are 35 known substitutes for S8KDDMILG3278A: Z99R3XRCJ3, R3ZZQ5A7MILG3278A, 4131103&4A1A&S and 32 more. Substitute compatibility should be verified for your specific system.
Is S8KDDMILG3278A still available?
S8KDDMILG3278A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8KDDMILG3278A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026