PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S8FF
S8FF ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.4370 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-8874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8FF
NSN: 3110-00-155-8874
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.4370 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter1.6250 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data115 TYPE AND 00 GRADE
NSN3110-00-155-8874
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S8FF · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
SHIELD QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
LOAD DIRECTIONRADIAL
SHIELD QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
3008-4Interchangeable
interchangeable cross-reference
interchangeable
CS1-3042Interchangeable
interchangeable cross-reference
interchangeable
559Interchangeable
interchangeable cross-reference
interchangeable
B1004Interchangeable
interchangeable cross-reference
interchangeable
258802Interchangeable
interchangeable cross-reference
interchangeable
457221Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S8FF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8FF?
S8FF is a BEARING,BALL,ANNULAR.
What parts can replace S8FF?
There are 31 known substitutes for S8FF: 3008-4, CS1-3042, 559 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S8FF?
S8FF is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-8874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8FF

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026