PartsTable
Technical Data Sheet
Download PDF

S89696 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S89696: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.188 INCHES NOMINAL IN, hole_diameter: 1.945 INCHES NOMINAL IN, overall_diameter: 2.625 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-071-3400, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S89696
NSN: 5310-01-071-3400
FSC: 5310 — Nuts and Washers
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.188 INCHES NOMINAL IN
hole_diameter1.945 INCHES NOMINAL IN
overall_diameter2.625 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-071-3400
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S89696 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.945 INCHES NOMINAL IN
•
THICKNESS: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.625 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATION2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.945 INCHES NOMINAL IN
THICKNESS0.188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
231916Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S89696?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S89696?
S89696 is a WASHER,FLAT.
What parts can replace S89696?
There is 1 known substitute for S89696: 231916. Substitute compatibility should be verified for your specific system.
What is the NSN for S89696?
S89696 is cataloged in the U.S. Government catalog under NSN 5310-01-071-3400. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S89696

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.