PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S89497
S89497 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, fork_depth: 2.500 INCHES NOMINAL IN, overall_width: 3.250 INCHES NOMINAL IN, shank_diameter: 1.000 INCHES NOMINAL IN, fork_span_width: 2.820 INCHES NOMINAL IN, fork_arm_thickness: 0.215 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-066-2738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S89497
NSN: 5340-01-066-2738
FSC: 5340
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
fork_depth2.500 INCHES NOMINAL IN
overall_width3.250 INCHES NOMINAL IN
shank_diameter1.000 INCHES NOMINAL IN
fork_span_width2.820 INCHES NOMINAL IN
fork_arm_thickness0.215 INCHES NOMINAL IN
securing_pin_hole_diameter1.310 INCHES NOMINAL IN
NSN5340-01-066-2738
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S89497 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SECURING PIN HOLE DIAMETER: 1.310 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 2.820 INCHES NOMINAL IN
•
SHANK DIAMETER: 1.000 INCHES NOMINAL IN
•
FORK DEPTH: 2.500 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.215 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SECURING PIN HOLE DIAMETER1.310 INCHES NOMINAL IN
FORK SPAN WIDTH2.820 INCHES NOMINAL IN
SHANK DIAMETER1.000 INCHES NOMINAL IN
FORK DEPTH2.500 INCHES NOMINAL IN
OVERALL WIDTH3.250 INCHES NOMINAL IN
FORK ARM THICKNESS0.215 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2703-2Interchangeable
interchangeable cross-reference
interchangeable
1547Interchangeable
interchangeable cross-reference
interchangeable
44371Interchangeable
interchangeable cross-reference
interchangeable
3791Interchangeable
interchangeable cross-reference
interchangeable
03791Interchangeable
interchangeable cross-reference
interchangeable
33791Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S89497?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S89497?
S89497 is a CLEVIS,ROD END.
What parts can replace S89497?
There are 7 known substitutes for S89497: 2703-2, 1547, 44371 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S89497?
S89497 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-066-2738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S89497

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026