PartsTable
Technical Data Sheet
PartsTable / MRO / S892
S892 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The FILTER,LOW PASS is a the manufacturer industrial component. Key specifications include diameter: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, body_width: 1.625 INCHES MINIMUM IN, case_style: SQUARE, seal_width: 0.547 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN, body_height: 2.375 INCHES MINIMUM IN, body_length: 1.625 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ S892
NSN: 5315-00-010-3387
FSC: 5315
CAGE: 64161 — WEAVER DIV OF DURA CORP (USA)
SPECIFICATIONS
diameter0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
materialSTEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
body_width1.625 INCHES MINIMUM IN
case_styleSQUARE
seal_width0.547 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
body_height2.375 INCHES MINIMUM IN
body_length1.625 INCHES MINIMUM IN
temp_rating250.0 FAHRENHEIT DEGF
inclosure_typeENCASED
overall_height2.750 INCHES MAXIMUM IN
style_designatorRECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
underloop_length1.500 INCHES NOMINAL IN
NSN5315-00-010-3387
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S892 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: STANDARD
•
UNDERLOOP LENGTH: 1.500 INCHES NOMINAL IN
•
DIAMETER: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 4 CLASS
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORSTANDARD
UNDERLOOP LENGTH1.500 INCHES NOMINAL IN
DIAMETER0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAB TYPE AND 4 CLASS
MATERIALSTEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
P-212Interchangeable
interchangeable cross-reference
interchangeable
WWP471Interchangeable
interchangeable cross-reference
interchangeable
A-A-59616Interchangeable
interchangeable cross-reference
interchangeable
4361Interchangeable
interchangeable cross-reference
interchangeable
8039Interchangeable
interchangeable cross-reference
interchangeable
56020904Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S892?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S892?
S892 is a FILTER,LOW PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace S892?
There are 25 known substitutes for S892: P-212, WWP471, A-A-59616 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S892?
S892 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S892

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026