S884K0146D270 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

S884K0146D270: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES FIRST END, seat_angle: 37.0 DEGREES SECOND END, temp_rating: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-313-1653, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S884K0146D270

NSN: 4720-01-313-1653
FSC: 4720 — Hose and Flexible Tubing
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)

SPECIFICATIONS

flow_angle	45.0 DEGREES FIRST END
seat_angle	37.0 DEGREES SECOND END
temp_rating	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class	2B FIRST END
connection_type	THREADED INTERNAL TUBE FIRST END
inside_diameter	1.375 INCHES NOMINAL IN
connection_style	SWIVEL NUT FLARE FIRST END
outside_diameter	1.704 INCHES NOMINAL IN
thread_direction	RIGHT-HAND SECOND END
operating_pressure	250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure	2000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size	1.875 INCHES SECOND END IN
NSN	4720-01-313-1653

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW ANGLE: 45.0 DEGREES FIRST END

•

MEASURING METHOD AND LENGTH: 14.750 INCHES NOMINAL WORKING IN

•

TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 9.000 INCHES IN

•

CONNECTION STYLE: SWIVEL NUT FLARE SECOND END

•

END CONNECTION DESIGN: ELBOW SECOND END

TECHNICAL CHARACTERISTICS

FLOW ANGLE	45.0 DEGREES FIRST END
FLOW ANGLE	90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH	14.750 INCHES NOMINAL WORKING IN
TEMP RATING	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	9.000 INCHES IN
CONNECTION STYLE	SWIVEL NUT FLARE SECOND END
CONNECTION STYLE	SWIVEL NUT FLARE FIRST END
END CONNECTION DESIGN	ELBOW SECOND END
END CONNECTION DESIGN	ELBOW FIRST END
LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE

OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

4720-00-000-0080 4720-00-000-0081 4720-00-000-0084 4720-00-000-0724 4720-00-001-0014 4720-00-001-0015 4720-00-001-0023 4720-00-001-0025

SUBSTITUTES & CROSS-REFERENCES 2

AE5200P0146-270Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SS43Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy S884K0146D270?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S884K0146D270?

S884K0146D270 is a HOSE ASSEMBLY,NONMETALLIC.

What parts can replace S884K0146D270?

There are 2 known substitutes for S884K0146D270: AE5200P0146-270, SS43. Substitute compatibility should be verified for your specific system.

What is the NSN for S884K0146D270?

S884K0146D270 is cataloged in the U.S. Government catalog under NSN 4720-01-313-1653. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S884K0146D270 — HOSE ASSEMBLY,NONMETALLIC

Request a Quote — S884K0146D270