PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S86832
S86832 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, housing_bore_diameter: 4.003 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8382, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S86832
NSN: 5330-00-154-8382
FSC: 5330
CAGE: 89629 — CHICAGO PNEUMATIC TOOL CO (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
housing_bore_diameter4.003 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-8382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S86832 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 3.125 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 4.003 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER3.125 INCHES NOMINAL IN
CASE STYLESQUARE
SEAL WIDTH0.469 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
HOUSING BORE DIAMETER4.003 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
150GInterchangeable
interchangeable cross-reference
interchangeable
B107.56Interchangeable
interchangeable cross-reference
interchangeable
G20-1041Interchangeable
interchangeable cross-reference
interchangeable
820-4551352PC 77Interchangeable
interchangeable cross-reference
interchangeable
7SHBQ11-5Interchangeable
interchangeable cross-reference
interchangeable
83139Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S86832?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S86832?
S86832 is a SEAL,PLAIN ENCASED.
What parts can replace S86832?
There are 15 known substitutes for S86832: 150G, B107.56, G20-1041 and 12 more. Substitute compatibility should be verified for your specific system.
Is S86832 still available?
S86832 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S86832

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026