PartsTable
Technical Data Sheet
Download PDF

S85 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

S85: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: STEEL CORROSION RESISTING OVERALL, end_style: SPRING END,GROUND BOTH ENDS, head_style: HEXAGON, head_height: 0.219 INCHES NOMINAL IN, point_style: FLAT. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-145-7553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S85
NSN: 9540-00-145-7553
NIINs: 001457553, 001983711, 005274186, 006391350, 011964770, 016195983
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 7EK50 — TEXTRON AVIATION INC (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialSTEEL CORROSION RESISTING OVERALL
end_styleSPRING END,GROUND BOTH ENDS
head_styleHEXAGON
head_height0.219 INCHES NOMINAL IN
point_styleFLAT
thread_class2A A
coil_quantity4
hole_diameter0.194 INCHES MINIMUM IN
overall_width0.625 INCHES NOMINAL IN
thread_length0.250 INCHES MAXIMUM IN
heat_treatmentT-3511 SOLUTION HEAT TREATED
NSN9540-00-145-7553
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN S85 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
•
BASE FLANGE THICKNESS: 0.040 INCHES NOMINAL IN
•
HEAT TREATMENT: T-3511 SOLUTION HEAT TREATED
•
FIRST TIP RADIUS: 0.040 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
•
LEFT SIDE FLANGE THICKNESS: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.625 INCHES NOMINAL IN
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS0.040 INCHES NOMINAL IN
HEAT TREATMENTT-3511 SOLUTION HEAT TREATED
FIRST TIP RADIUS0.040 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH0.625 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS0.040 INCHES NOMINAL IN
SECOND TIP RADIUS0.040 INCHES NOMINAL IN
BASIC SHAPE STYLEANGLE
SUBSTITUTES & CROSS-REFERENCES 7
LS1198Reference document
Same NSN cross-reference
Reference document — Secondary reference
CVC1638Reference document
Same NSN cross-reference
Reference document — Secondary reference
AMS-QQ-A-200/3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
PA3035Reference document
Same NSN cross-reference
Reference document — Secondary reference
QQ-A-200/3Reference document
Same NSN cross-reference
Reference document — Secondary reference
9540PL1780030Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S85?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S85?
S85 is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace S85?
There are 7 known substitutes for S85: LS1198, CVC1638, AMS-QQ-A-200/3 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S85?
S85 is cataloged in the U.S. Government catalog under NSN 9540-00-145-7553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S85