PartsTable
Technical Data Sheet
Download PDF

S84585 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S84585: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, fork_depth: 1.230 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN, thread_length: 0.500 INCHES NOMINAL ROD CONNECTION IN, fork_span_width: 0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-071-6381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S84585
NSN: 5340-01-071-6381
FSC: 5340 — Hardware, Commercial
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
fork_depth1.230 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
thread_class2B ROD CONNECTION
hole_diameter0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL ROD CONNECTION IN
fork_span_width0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
special_features2 PINS FURNISHED
thread_directionRIGHT-HAND ROD CONNECTION
nominal_thread_size0.620 INCHES ROD CONNECTION IN
thread_series_designatorUNF ROD CONNECTION
distance_from_pivot_pinhole_center_to_rod_connection_end1.730 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN
NSN5340-01-071-6381
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S84585 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.500 INCHES NOMINAL ROD CONNECTION IN
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.620 INCHES ROD CONNECTION IN
•
THREAD CLASS: 2B ROD CONNECTION
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNF ROD CONNECTION
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
THREAD LENGTH0.500 INCHES NOMINAL ROD CONNECTION IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.620 INCHES ROD CONNECTION IN
SPECIAL FEATURES2 PINS FURNISHED
THREAD CLASS2B ROD CONNECTION
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNF ROD CONNECTION
FORK DEPTH1.230 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
HOLE DIAMETER0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
TR-3104Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S84585?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S84585?
S84585 is a CLEVIS,ROD END.
What parts can replace S84585?
There is 1 known substitute for S84585: TR-3104. Substitute compatibility should be verified for your specific system.
What is the NSN for S84585?
S84585 is cataloged in the U.S. Government catalog under NSN 5340-01-071-6381. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S84585