PartsTable
Technical Data Sheet
Download PDF

S834 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S834: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, overall_width: 0.625 INCHES NOMINAL IN, overall_length: 0.625 INCHES NOMINAL IN, material_thickness: 0.062 INCHES NOMINAL IN, first_surface_hole_size: 0.143 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN, first_surface_hole_quantity: 56. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-813-6475, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S834
NSN: 5340-00-813-6475
NIINs: 008136475, 012331300, 012889539
FSC: 5340 — Hardware, Commercial
CAGE: 0BFT0 — KISSINGER ROBERT E (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
overall_width0.625 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL IN
material_thickness0.062 INCHES NOMINAL IN
first_surface_hole_size0.143 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
first_surface_hole_quantity56
NSN5340-00-813-6475
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S834 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.500 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
HEIGHT: 0.313 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.500 INCHES NOMINAL IN
OVERALL LENGTH0.625 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
HEIGHT0.313 INCHES NOMINAL IN
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
TONGUE LENGTH0.313 INCHES NOMINAL IN
FIRST SURFACE HOLE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 1
15834Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S834?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S834?
S834 is a STRIKE,CATCH.
What parts can replace S834?
There is 1 known substitute for S834: 15834. Substitute compatibility should be verified for your specific system.
What is the NSN for S834?
S834 is cataloged in the U.S. Government catalog under NSN 5340-00-813-6475. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S834