PartsTable
Technical Data Sheet
Download PDF

S8157N388-032 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S8157N388-032: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include thickness: 0.032 INCHES NOMINAL IN, hole_diameter: 0.260 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, overall_diameter: 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND, cross-sectional_shape_style: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-582-8366, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8157N388-032
NSN: 5310-00-582-8366
NIINs: 005828366, 009223270
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL CORROSION RESISTING OR STEEL COMP 302 OR STEEL COMP 316 OVERALL
thickness0.032 INCHES NOMINAL IN
hole_diameter0.260 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
overall_diameter0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
specification/standard_data70210-S8157 MANUFACTURERS STANDARD
NSN5310-00-582-8366
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S8157N388-032 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 CLASS 1 COND 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 CLASS 1 COND 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTPASSIVATE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
THICKNESS0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
214205Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
233020Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S8157N388-032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8157N388-032?
S8157N388-032 is a WASHER,FLAT.
What parts can replace S8157N388-032?
There are 2 known substitutes for S8157N388-032: 214205, 233020. Substitute compatibility should be verified for your specific system.
What is the NSN for S8157N388-032?
S8157N388-032 is cataloged in the U.S. Government catalog under NSN 5310-00-582-8366. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8157N388-032