PartsTable
Technical Data Sheet
Download PDF

S8157N176-010 — Technical Data Sheet

✓ Government record, cited
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DISK,SOLID,PLAIN is a the manufacturer industrial component. Key specifications include diameter: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING, thickness: 0.010 INCHES NOMINAL IN, machined_surface_finish: SMOOTH. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-890-7968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8157N176-010
NSN: 5340-00-890-7968
FSC: 5340 — Hardware, Commercial
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
diameter0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING
thickness0.010 INCHES NOMINAL IN
machined_surface_finishSMOOTH
NSN5340-00-890-7968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S8157N176-010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MACHINED SURFACE FINISH: SMOOTH
•
DIAMETER: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING
•
THICKNESS: 0.010 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MACHINED SURFACE FINISHSMOOTH
DIAMETER0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING
THICKNESS0.010 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S8157N176-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8157N176-010?
S8157N176-010 is a DISK,SOLID,PLAIN.
What is the NSN for S8157N176-010?
S8157N176-010 is cataloged in the U.S. Government catalog under NSN 5340-00-890-7968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8157N176-010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.