S8154-10C025 — WASHER,FLAT

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

S8154-10C025: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN, hole_diameter: 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES BOTTOM, overall_diameter: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-147-8208, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S8154-10C025

NSN: 5310-01-147-8208
FSC: 5310 — Nuts and Washers
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)

SPECIFICATIONS

material	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OVERALL
thickness	0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
hole_diameter	0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
surface_finish	63.0 MICROINCHES BOTTOM
overall_diameter	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
peripheral_shape_style	ROUND
center_hole_shape_style	ROUND
cross-sectional_shape_style	RECTANGULAR
NSN	5310-01-147-8208

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 63.0 MICROINCHES BOTTOM

•

OVERALL DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,CONC 1/4 HARD,1/2 HARD,FULL HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059,COND 1/4 HARD,FINISH NO. 2B MIL SPEC 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE OVERALL

•

CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR

•

PERIPHERAL SHAPE STYLE: ROUND

•

MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OVERALL

•

CENTER HOLE SHAPE STYLE: ROUND

TECHNICAL CHARACTERISTICS

SURFACE FINISH	63.0 MICROINCHES BOTTOM
SURFACE FINISH	63.0 MICROINCHES TOP
OVERALL DIAMETER	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059,CONC 1/4 HARD,1/2 HARD,FULL HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059,COND 1/4 HARD,FINISH NO. 2B MIL SPEC 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
PERIPHERAL SHAPE STYLE	ROUND
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
THICKNESS	0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 1

10109816Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy S8154-10C025?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S8154-10C025?

S8154-10C025 is a WASHER,FLAT.

What parts can replace S8154-10C025?

There is 1 known substitute for S8154-10C025: 10109816. Substitute compatibility should be verified for your specific system.

What is the NSN for S8154-10C025?

S8154-10C025 is cataloged in the U.S. Government catalog under NSN 5310-01-147-8208. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S8154-10C025 — WASHER,FLAT

Request a Quote — S8154-10C025