PartsTable
Technical Data Sheet
Download PDF

S8153-34-064C — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S8153-34-064C: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include thickness: 0.064 INCHES NOMINAL IN, hole_diameter: 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, overall_diameter: 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-040-4747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8153-34-064C
NSN: 5310-01-040-4747
FSC: 5310 — Nuts and Washers
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OVERALL
thickness0.064 INCHES NOMINAL IN
hole_diameter0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
overall_diameter0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
surface_treatment_document_and_classificationQQ-P-416,TYPE 1,CLASS A FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-040-4747
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S8153-34-064C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS A FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-698 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-698 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-698 FED SPEC 4TH MATERIAL RESPONSE OR ASTM A-108 ASSN STD 4TH MATERIAL RESPONSE OR ASTM A-108 ASSN STD 5TH MATERIAL RESPONSE OR QQ-S-698 FED SPEC 5TH MATERIAL RESPONSE OR MIL-S-7959 MIL SPEC 5TH MATERIAL RESPONSE OR ASTM A-108 ASSN STD 6TH MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 7TH MATERIAL RESPONSE OR ASTM A-108 ASSN STD 7TH MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 1,CLASS A FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-698 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-698 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-698 FED SPEC 4TH MATERIAL RESPONSE OR ASTM A-108 ASSN STD 4TH MATERIAL RESPONSE OR ASTM A-108 ASSN STD 5TH MATERIAL RESPONSE OR QQ-S-698 FED SPEC 5TH MATERIAL RESPONSE OR MIL-S-7959 MIL SPEC 5TH MATERIAL RESPONSE OR ASTM A-108 ASSN STD 6TH MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 7TH MATERIAL RESPONSE OR ASTM A-108 ASSN STD 7TH MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
THICKNESS0.064 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S8153-34-064C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8153-34-064C?
S8153-34-064C is a WASHER,FLAT.
What is the NSN for S8153-34-064C?
S8153-34-064C is cataloged in the U.S. Government catalog under NSN 5310-01-040-4747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8153-34-064C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.