PartsTable
Technical Data Sheet
Download PDF

S8152U12-0-125 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S8152U12-0-125: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: MAGNESIUM OVERALL, first_end_style: CHAMFERED, special_features: 26,000 PSI MIN YIELD STRENGTH, surface_treatment: DICHROMATE OVERALL, pin_overall_length: 0.125 INCHES NOMINAL IN, pin_overall_diameter: 0.1240 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-151-4799, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8152U12-0-125
NSN: 5315-00-151-4799
NIINs: 001514799, 002050232
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialMAGNESIUM OVERALL
first_end_styleCHAMFERED
special_features26,000 PSI MIN YIELD STRENGTH
surface_treatmentDICHROMATE OVERALL
pin_overall_length0.125 INCHES NOMINAL IN
pin_overall_diameter0.1240 INCHES MINIMUM IN
first_end_taper_angle44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
first_end_taper_length0.025 INCHES NOMINAL IN
material_document_and_classificationQQ-M-31 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-151-4799
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S8152U12-0-125 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: SQUARE
•
PIN OVERALL DIAMETER: 0.1250 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 0.125 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: MAGNESIUM OVERALL
TECHNICAL CHARACTERISTICS
FIRST END STYLESQUARE
PIN OVERALL DIAMETER0.1250 INCHES NOMINAL IN
PIN OVERALL LENGTH0.125 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTANODIZE OVERALL
MATERIALMAGNESIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S8152U12-0-125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8152U12-0-125?
S8152U12-0-125 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for S8152U12-0-125?
S8152U12-0-125 is cataloged in the U.S. Government catalog under NSN 5315-00-151-4799. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8152U12-0-125