PartsTable
Technical Data Sheet
Download PDF

S8152D5-0-250 — DISK,SOLID,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S8152D5-0-250: DISK,SOLID,PLAIN.

The DISK,SOLID,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: SQUARE, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL, surface_treatment: CADMIUM OVERALL, pin_overall_length: 0.250 INCHES NOMINAL IN, pin_overall_diameter: 0.0687 INCHES MINIMUM AND 0.0693 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-209-7116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8152D5-0-250
NSN: 5340-00-209-7116
NIINs: 002097116, 012310373
FSC: 5340 — Hardware, Commercial
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleSQUARE
hardness_rating40.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL
surface_treatmentCADMIUM OVERALL
pin_overall_length0.250 INCHES NOMINAL IN
pin_overall_diameter0.0687 INCHES MINIMUM AND 0.0693 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL C FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-209-7116
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S8152D5-0-250 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MACHINED SURFACE FINISH: ROLLED
•
DIAMETER: 0.693 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMIUM
•
MATERIAL: STEEL
•
THICKNESS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MACHINED SURFACE FINISHROLLED
DIAMETER0.693 INCHES NOMINAL IN
SURFACE TREATMENTCHROMIUM
MATERIALSTEEL
THICKNESS0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S8152D5-0-250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8152D5-0-250?
S8152D5-0-250 is a DISK,SOLID,PLAIN.
What is the NSN for S8152D5-0-250?
S8152D5-0-250 is cataloged in the U.S. Government catalog under NSN 5340-00-209-7116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8152D5-0-250

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.