PartsTable
Technical Data Sheet
Download PDF

S814FR5P24LY286 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

S814FR5P24LY286: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OR STEEL COMP 303 RETAINER, bore_shape: STRAIGHT, flange_width: 0.0210 INCHES MINIMUM AND 0.0230 INCHES MAXIMUM IN, bore_diameter: 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.1240 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-294-8117, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S814FR5P24LY286
NSN: 3110-01-294-8117
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OR STEEL COMP 303 RETAINER
bore_shapeSTRAIGHT
flange_width0.0210 INCHES MINIMUM AND 0.0230 INCHES MAXIMUM IN
bore_diameter0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.1240 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_features571-9442-01 /25583 NO LONGER CONSIDERED A SOURCE CONTROL DRWG AS TERMINAL STOCK IS ONLY AVAILABLE FROM CAGE CODE 25583
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
flange_outside_diameter0.5460 INCHES MINIMUM AND 0.5470 INCHES MAXIMUM IN
NSN3110-01-294-8117
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S814FR5P24LY286 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: OIL
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.5460 INCHES MINIMUM AND 0.5470 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-766,COND A FED SPEC 2ND MATERIAL RESPONSE RETAINER
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALOIL
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.5460 INCHES MINIMUM AND 0.5470 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-766,COND A FED SPEC 2ND MATERIAL RESPONSE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING
SUBSTITUTES & CROSS-REFERENCES 3
10107564Reference document
Same NSN cross-reference
Reference document — Informative reference only
SSRIF-8516SD503RA5P24LY676USame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
571-9442-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S814FR5P24LY286?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S814FR5P24LY286?
S814FR5P24LY286 is a BEARING,BALL,ANNULAR.
What parts can replace S814FR5P24LY286?
There are 3 known substitutes for S814FR5P24LY286: 10107564, SSRIF-8516SD503RA5P24LY676U, 571-9442-01. Substitute compatibility should be verified for your specific system.
What is the NSN for S814FR5P24LY286?
S814FR5P24LY286 is cataloged in the U.S. Government catalog under NSN 3110-01-294-8117. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S814FR5P24LY286

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.