PartsTable
Technical Data Sheet
Download PDF

S8079C4R — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S8079C4R: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: HEXAGON, nut_height: 0.125 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-208-7662, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8079C4R
NSN: 5310-00-208-7662
NIINs: 002087662, 002824777
FSC: 5310 — Nuts and Washers
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleHEXAGON
nut_height0.125 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
countersink_angle110.0 DEGREES NOMINAL BOTH ENDS
surface_treatmentPASSIVATE OVERALL
width_across_flats0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter0.047 INCHES NOMINAL IN
NSN5310-00-208-7662
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S8079C4R · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION A
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.125 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.047 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION A
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.125 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.047 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH28
SUBSTITUTES & CROSS-REFERENCES 1
10116675Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S8079C4R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8079C4R?
S8079C4R is a NUT,PLAIN,HEXAGON.
What parts can replace S8079C4R?
There is 1 known substitute for S8079C4R: 10116675. Substitute compatibility should be verified for your specific system.
What is the NSN for S8079C4R?
S8079C4R is cataloged in the U.S. Government catalog under NSN 5310-00-208-7662. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8079C4R

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.