PartsTable
Technical Data Sheet
Download PDF

S8079-8D — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S8079-8D: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.312 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-082-3878, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8079-8D
NSN: 5310-01-082-3878
FSC: 5310 — Nuts and Washers
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
nut_styleHEXAGON
nut_height0.312 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL BOTH ENDS
surface_treatmentANODIZE OVERALL
width_across_flats1.000 INCHES NOMINAL IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter0.075 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
NSN5310-01-082-3878
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S8079-8D · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.000 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT HEIGHT: 0.312 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.075 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.000 INCHES NOMINAL IN
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION B
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT HEIGHT0.312 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.075 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
COUNTERSINK ANGLE90.0 DEGREES NOMINAL BOTH ENDS
NUT STYLEHEXAGON
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S8079-8D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8079-8D?
S8079-8D is a NUT,PLAIN,HEXAGON.
What is the NSN for S8079-8D?
S8079-8D is cataloged in the U.S. Government catalog under NSN 5310-01-082-3878. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8079-8D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.