PartsTable
Technical Data Sheet
Download PDF

S8079-3 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S8079-3: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-032-9232, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8079-3
NSN: 5310-00-032-9232
FSC: 5310 — Nuts and Washers
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch32
NSN5310-00-032-9232
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S8079-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
56187Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy S8079-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8079-3?
S8079-3 is a NUT,PLAIN,HEXAGON.
What parts can replace S8079-3?
There is 1 known substitute for S8079-3: 56187. Substitute compatibility should be verified for your specific system.
What is the NSN for S8079-3?
S8079-3 is cataloged in the U.S. Government catalog under NSN 5310-00-032-9232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8079-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.