PartsTable
Technical Data Sheet
Download PDF

S8079-240 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S8079-240: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 316 OVERALL, nut_style: HEXAGON, nut_height: 0.473 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, special_features: NUT HAS 2 HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-653-6450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8079-240
NSN: 5310-01-653-6450
FSC: 5310 — Nuts and Washers
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OR STEEL COMP 316 OVERALL
nut_styleHEXAGON
nut_height0.473 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
special_featuresNUT HAS 2 HOLES
thread_directionRIGHT-HAND
width_across_flats0.861 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
nominal_thread_size0.562 INCHES IN
bearing_surface_typeCHAMFERED OR FLAT OR WASHER FACED
end_item_identificationAN/APG-82(V)
thread_quantity_per_inch18
NSN5310-01-653-6450
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S8079-240 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.861 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
NUT HEIGHT: 0.473 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.861 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.562 INCHES IN
NUT HEIGHT0.473 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
SPECIAL FEATURESNUT HAS 2 HOLES
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT-ADJUSTMENT, NEEDLE LOCKING
NUT STYLEHEXAGON
THREAD CLASS3B
END ITEM IDENTIFICATIONAN/APG-82(V)
SUBSTITUTES & CROSS-REFERENCES 1
S8079Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S8079-240?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8079-240?
S8079-240 is a NUT,PLAIN,HEXAGON.
What parts can replace S8079-240?
There is 1 known substitute for S8079-240: S8079. Substitute compatibility should be verified for your specific system.
What is the NSN for S8079-240?
S8079-240 is cataloged in the U.S. Government catalog under NSN 5310-01-653-6450. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8079-240

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.