PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S8054
S8054 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include temp_rating: -55.0 OPERATING CELSIUS AND 100.0 OPERATING CELSIUS, current_type: AC INPUT, overall_width: 0.750 INCHES IN, overall_length: 1.103 INCHES IN, shaft_diameter: 0.1237 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE END IN, teeth_quantity: 13 SINGLE END. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-215-5336, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S8054
NSN: 5330-00-215-5336
FSC: 5330
CAGE: 20219 — ELGIN SWEEPER COMPANY (USA)
SPECIFICATIONS
temp_rating-55.0 OPERATING CELSIUS AND 100.0 OPERATING CELSIUS
current_typeAC INPUT
overall_width0.750 INCHES IN
overall_length1.103 INCHES IN
shaft_diameter0.1237 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE END IN
teeth_quantity13 SINGLE END
mounting_methodCLAMP RING(S)
enclosure_featureTOTALLY ENCLOSED
frequency_in_hertz400.0 INPUT
current_rating_methodLOAD
current_rating_in_amps0.030 SINGLE INPUT
torque_rating_and_type0.04 INCH-OUNCES STALLED IN
NSN5330-00-215-5336
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S8054 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 3.194 INCHES NOMINAL IN
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER3.194 INCHES NOMINAL IN
SEAL WIDTH0.469 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
50095Interchangeable
interchangeable cross-reference
interchangeable
MMC1165202Interchangeable
interchangeable cross-reference
interchangeable
5306AC1014-1Interchangeable
interchangeable cross-reference
interchangeable
60836HInterchangeable
interchangeable cross-reference
interchangeable
1B936Interchangeable
interchangeable cross-reference
interchangeable
11073AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S8054?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8054?
S8054 is a SEAL,PLAIN ENCASED.
What parts can replace S8054?
There are 20 known substitutes for S8054: 50095, MMC1165202, 5306AC1014-1 and 17 more. Substitute compatibility should be verified for your specific system.
Is S8054 still available?
S8054 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S8054

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026