PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S753-250
S753-250 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,STRAP is a the manufacturer industrial component. Key specifications include material: STEEL BODY, body_width: 1.063 INCHES NOMINAL IN, knuckle_type: FRICTION, coating_method: ELECTROPLATED BODY, performance_type: LIGHT DUTY, style_designator: STRAP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-664-1317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S753-250
NSN: 5340-00-664-1317
FSC: 5340
CAGE: L02F1 — STANLEY HARDWARE (CAN)
SPECIFICATIONS
materialSTEEL BODY
body_width1.063 INCHES NOMINAL IN
knuckle_typeFRICTION
coating_methodELECTROPLATED BODY
knuckle_quantity3
performance_typeLIGHT DUTY
style_designatorSTRAP
surface_treatmentZINC BODY
material_thickness0.052 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
mounting_hole_diameter0.157 INCHES NOMINAL IN
mounting_hole_quantity6
NSN5340-00-664-1317
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S753-250 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 0.157 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BODY
•
MATERIAL: STEEL BODY
•
STYLE DESIGNATOR: STRAP
•
COATING METHOD: ELECTROPLATED BODY
•
BODY WIDTH: 1.063 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.052 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE DIAMETER0.157 INCHES NOMINAL IN
SURFACE TREATMENTZINC BODY
MATERIALSTEEL BODY
STYLE DESIGNATORSTRAP
MATERIALCOPPER ALLOY PIN
COATING METHODELECTROPLATED BODY
BODY WIDTH1.063 INCHES NOMINAL IN
MATERIAL THICKNESS0.052 INCHES NOMINAL IN
PERFORMANCE TYPELIGHT DUTY
KNUCKLE TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
FF-H-00116Interchangeable
interchangeable cross-reference
interchangeable
ANSI/BHMA A156.1Interchangeable
interchangeable cross-reference
interchangeable
A-A-226Interchangeable
interchangeable cross-reference
interchangeable
917KBPSIZE6Interchangeable
interchangeable cross-reference
interchangeable
A83251, 6" SIZEInterchangeable
interchangeable cross-reference
interchangeable
MS27965-18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S753-250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S753-250?
S753-250 is a HINGE,STRAP.
What parts can replace S753-250?
There are 16 known substitutes for S753-250: FF-H-00116, ANSI/BHMA A156.1, A-A-226 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S753-250?
S753-250 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-664-1317. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S753-250

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026