S717-104S — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

S717-104S: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, material_thickness: 0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN, loop_inside_diameter: 0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, material_document_and_classification: BPS-C-163 TY1 MFR REF SINGLE MATERIAL RESPONSE CUSHION. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-592-3997, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S717-104S

NSN: 5340-01-592-3997
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)

SPECIFICATIONS

material	STEEL BAND
overall_width	0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
material_thickness	0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN
loop_inside_diameter	0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
material_document_and_classification	BPS-C-163 TY1 MFR REF SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end	0.858 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.640 INCHES NOMINAL IN
NSN	5340-01-592-3997

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A109 ASSN STD SINGLE MATERIAL RESPONSE NUT

•

MATERIAL THICKNESS: 0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.858 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.640 INCHES NOMINAL IN

•

MATERIAL: RUBBER SILICONE CLASS Q CUSHION

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A109 ASSN STD SINGLE MATERIAL RESPONSE NUT
MATERIAL DOCUMENT AND CLASSIFICATION	BPS-C-163 TY1 MFR REF SINGLE MATERIAL RESPONSE CUSHION
OVERALL WIDTH	0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.858 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.640 INCHES NOMINAL IN
MATERIAL	RUBBER SILICONE CLASS Q CUSHION
MATERIAL	STEEL BAND
LOOP INSIDE DIAMETER	0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

534CS104Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

JM44LC39S104RGSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy S717-104S?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S717-104S?

S717-104S is a CLAMP,LOOP.

What parts can replace S717-104S?

There are 2 known substitutes for S717-104S: 534CS104, JM44LC39S104RG. Substitute compatibility should be verified for your specific system.

What is the NSN for S717-104S?

S717-104S is cataloged in the U.S. Government catalog under NSN 5340-01-592-3997. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S717-104S — CLAMP,LOOP

Request a Quote — S717-104S