PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S6925
S6925 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GLAND,PACKING is a the manufacturer industrial component. Key specifications include material: LEATHER CATTLEHIDE OVERALL, special_features: MUST HAVE A BEARING SURFACE WIDTH OF 0.183 IN. MIN TO 0.198 IN.

MAX IN, peripheral_diameter: 2.359 INCHES MINIMUM AND 2.391 INCHES MAXIMUM IN, center_hole_diameter: 2.000 INCHES NOMINAL IN, cross-sectional_height: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-008-9252, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6925
NSN: 5330-00-008-9252
FSC: 5330
CAGE: 49524 — SCOTSMAN INDUSTRIES INC DIV SCOTSMAN ICE SYSTEMS (USA)
SPECIFICATIONS
materialLEATHER CATTLEHIDE OVERALL
special_featuresMUST HAVE A BEARING SURFACE WIDTH OF 0.183 IN. MIN TO 0.198 IN. MAX IN
peripheral_diameter2.359 INCHES MINIMUM AND 2.391 INCHES MAXIMUM IN
center_hole_diameter2.000 INCHES NOMINAL IN
cross-sectional_height0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-008-9252
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6925 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1283-329Interchangeable
interchangeable cross-reference
interchangeable
2216LS-329Interchangeable
interchangeable cross-reference
interchangeable
S6925Interchangeable
interchangeable cross-reference
interchangeable
19971A1Interchangeable
interchangeable cross-reference
interchangeable
65904Interchangeable
interchangeable cross-reference
interchangeable
58945Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S6925?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6925?
S6925 is a GLAND,PACKING.
What parts can replace S6925?
There are 6 known substitutes for S6925: 1283-329, 2216LS-329, S6925 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S6925?
S6925 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-008-9252. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6925

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026