PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S6764
S6764 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.6250 INCHES NOMINAL IN, cone_width: 0.8125 INCHES NOMINAL IN, bore_diameter: 1.1250 INCHES NOMINAL IN, overall_width: 0.8125 INCHES NOMINAL IN, standout_width: 0.1875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6764
NSN: 3110-00-100-6012
FSC: 3110
CAGE: 20219 — ELGIN SWEEPER COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.6250 INCHES NOMINAL IN
cone_width0.8125 INCHES NOMINAL IN
bore_diameter1.1250 INCHES NOMINAL IN
overall_width0.8125 INCHES NOMINAL IN
standout_width0.1875 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.0460 INCHES NOMINAL IN
overall_outside_diameter2.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-6012
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S6764 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.1250 INCHES NOMINAL IN
•
CUP WIDTH: 0.6250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 2.5000 INCHES NOMINAL IN
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.1250 INCHES NOMINAL IN
CUP WIDTH0.6250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER2.5000 INCHES NOMINAL IN
CONE WIDTH0.8125 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0460 INCHES NOMINAL IN
STANDOUT WIDTH0.1875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
L9Interchangeable
interchangeable cross-reference
interchangeable
L-9-2559Interchangeable
interchangeable cross-reference
interchangeable
W-1050-FInterchangeable
interchangeable cross-reference
interchangeable
B18.3Interchangeable
interchangeable cross-reference
interchangeable
0AInterchangeable
interchangeable cross-reference
interchangeable
47-13L9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S6764?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6764?
S6764 is a BEARING,ROLLER,TAPERED.
What parts can replace S6764?
There are 18 known substitutes for S6764: L9, L-9-2559, W-1050-F and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S6764?
S6764 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6012. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6764

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026