PartsTable
Technical Data Sheet
Download PDF

S6316FCHHE3LG31 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

S6316FCHHE3LG31: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, flange_width: 0.0310 INCHES NOMINAL IN, bore_diameter: 0.1875 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-124-9072, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6316FCHHE3LG31
NSN: 3110-00-124-9072
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
flange_width0.0310 INCHES NOMINAL IN
bore_diameter0.1875 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
inner_ring_width0.1562 INCHES NOMINAL IN
outer_ring_width0.1250 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
NSN3110-00-124-9072
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S6316FCHHE3LG31 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.1250 INCHES NOMINAL IN
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.4220 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.1250 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.4220 INCHES NOMINAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
FLANGE WIDTH0.0310 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
S187-375FCHHELG31Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1-1205-002Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
529260C90031-01Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6316FCHHE3LG31?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6316FCHHE3LG31?
S6316FCHHE3LG31 is a BEARING,BALL,ANNULAR.
What parts can replace S6316FCHHE3LG31?
There are 3 known substitutes for S6316FCHHE3LG31: S187-375FCHHELG31, 1-1205-002, 529260C90031-01. Substitute compatibility should be verified for your specific system.
What is the NSN for S6316FCHHE3LG31?
S6316FCHHE3LG31 is cataloged in the U.S. Government catalog under NSN 3110-00-124-9072. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6316FCHHE3LG31

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.