PartsTable
Technical Data Sheet
Download PDF

S6250C — PUSH ON NUT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S6250C: PUSH ON NUT.

The PUSH ON NUT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PUSH ON, nut_diameter: 0.450 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL, material_thickness: 0.015 INCHES NOMINAL IN, mating_member_diameter_accommodated: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-226-5745, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6250C
NSN: 5310-00-226-5745
NIINs: 002265745, 009852325
FSC: 5310 — Nuts and Washers
CAGE: 17233 — SPIRON INC BRANCH OF ANDEL INC BURBANK CALIF (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePUSH ON
nut_diameter0.450 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.015 INCHES NOMINAL IN
mating_member_diameter_accommodated0.250 INCHES NOMINAL IN
NSN5310-00-226-5745
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S6250C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
NUT DIAMETER: 0.445 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: PUSH ON
•
MATERIAL: STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1085 OR STEEL COMP 1086 OR STEEL COMP 1090 OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NUT DIAMETER0.445 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN
MATING MEMBER DIAMETER ACCOMMODATED0.250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEPUSH ON
MATERIALSTEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1085 OR STEEL COMP 1086 OR STEEL COMP 1090 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
5105-24MDReference document
Same NSN cross-reference
Reference document — Secondary reference
S6-6250CReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6250C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6250C?
S6250C is a PUSH ON NUT.
What parts can replace S6250C?
There are 2 known substitutes for S6250C: 5105-24MD, S6-6250C. Substitute compatibility should be verified for your specific system.
What is the NSN for S6250C?
S6250C is cataloged in the U.S. Government catalog under NSN 5310-00-226-5745. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6250C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.