PartsTable
Technical Data Sheet
Download PDF

S6165-20241 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6165-20241: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, special_features: 2 FLANGES, surface_treatment: PASSIVATE OVERALL, inner_groove_depth: 0.052 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN, inner_groove_width: 0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, outer_groove_depth: 0.054 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-700-1608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6165-20241
NSN: 5330-00-700-1608
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
special_features2 FLANGES
surface_treatmentPASSIVATE OVERALL
inner_groove_depth0.052 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
inner_groove_width0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
outer_groove_depth0.054 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
fsc_application_dataSERVOCYLINDER,HYDRAULIC,ACFT
cross-sectional_height0.406 INCHES NOMINAL IN
cross_section_inside_diameter0.268 INCHES MINIMUM AND 0.269 INCHES MAXIMUM IN
flanged_body_outside_diameter0.562 INCHES NOMINAL IN
cross_section_outside_diameter0.930 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-763,COMP 410 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-700-1608
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6165-20241 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER GROOVE DEPTH: 0.054 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
•
FSC APPLICATION DATA: SERVOCYLINDER,HYDRAULIC,ACFT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SS8435,FSCM 78286 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.406 INCHES NOMINAL IN
•
INNER GROOVE DEPTH: 0.052 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COMP 410 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS SECTION INSIDE DIAMETER: 0.268 INCHES MINIMUM AND 0.269 INCHES MAXIMUM IN
•
FLANGED BODY OUTSIDE DIAMETER: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER GROOVE DEPTH0.054 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
FSC APPLICATION DATASERVOCYLINDER,HYDRAULIC,ACFT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSS8435,FSCM 78286 MFR REF SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL HEIGHT0.406 INCHES NOMINAL IN
INNER GROOVE DEPTH0.052 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COMP 410 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS SECTION INSIDE DIAMETER0.268 INCHES MINIMUM AND 0.269 INCHES MAXIMUM IN
FLANGED BODY OUTSIDE DIAMETER0.562 INCHES NOMINAL IN
INNER GROOVE WIDTH0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
SPECIAL FEATURES2 FLANGES
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6165-20241?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6165-20241?
S6165-20241 is a RETAINER,PACKING.
What is the NSN for S6165-20241?
S6165-20241 is cataloged in the U.S. Government catalog under NSN 5330-00-700-1608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6165-20241

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.