PartsTable
Technical Data Sheet
Download PDF

S6135-20622-2 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S6135-20622-2: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, nut_style: ROUND, nut_diameter: 3.656 INCHES NOMINAL IN, nut_thickness: 0.405 INCHES NOMINAL IN, thread_series: BUTTRESS, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-010-3081, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6135-20622-2
NSN: 5310-00-010-3081
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
nut_styleROUND
nut_diameter3.656 INCHES NOMINAL IN
nut_thickness0.405 INCHES NOMINAL IN
thread_seriesBUTTRESS
hardness_rating26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
flange_thickness0.237 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL BOTH ENDS
drive_point_depth0.187 INCHES NOMINAL IN
drive_point_width0.375 INCHES NOMINAL IN
undercut_thickness0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
NSN5310-00-010-3081
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S6135-20622-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.237 INCHES NOMINAL IN
•
THREAD SERIES: BUTTRESS
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
•
HOLE CONFIGURATION STYLE: CONFIGURATION F
•
THREAD PITCH DIAMETERS: +3.0750 TO 3.0803 INCHES IN
•
DRIVE POINT WIDTH: 0.375 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 3.125 INCHES IN
TECHNICAL CHARACTERISTICS
FLANGE THICKNESS0.237 INCHES NOMINAL IN
THREAD SERIESBUTTRESS
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
HOLE CONFIGURATION STYLECONFIGURATION F
THREAD PITCH DIAMETERS+3.0750 TO 3.0803 INCHES IN
DRIVE POINT WIDTH0.375 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE3.125 INCHES IN
NUT DIAMETER3.656 INCHES NOMINAL IN
DRIVE POINT DEPTH0.187 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S6135-20622-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6135-20622-2?
S6135-20622-2 is a NUT,PLAIN,ROUND.
What is the NSN for S6135-20622-2?
S6135-20622-2 is cataloged in the U.S. Government catalog under NSN 5310-00-010-3081. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6135-20622-2