PartsTable
Technical Data Sheet
Download PDF

S6135-20053-12 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S6135-20053-12: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OVERALL, nut_diameter: 2.106 INCHES NOMINAL IN, nut_thickness: 0.312 INCHES NOMINAL IN, thread_series: BUTTRESS, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM, flange_thickness: 0.162 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-723-6060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6135-20053-12
NSN: 5310-00-723-6060
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 OVERALL
nut_diameter2.106 INCHES NOMINAL IN
nut_thickness0.312 INCHES NOMINAL IN
thread_seriesBUTTRESS
hardness_rating26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
flange_thickness0.162 INCHES NOMINAL IN
thread_directionRIGHT-HAND
undercut_thickness0.100 INCHES NOMINAL IN
nominal_thread_size1.625 INCHES IN
drive_point_quantity8
thread_quantity_per_inch16
material_document_and_classificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-723-6060
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S6135-20053-12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.162 INCHES NOMINAL IN
•
THREAD SERIES: BUTTRESS
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.625 INCHES IN
•
NUT DIAMETER: 2.106 INCHES NOMINAL IN
•
UNDERCUT THICKNESS: 0.100 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE THICKNESS0.162 INCHES NOMINAL IN
THREAD SERIESBUTTRESS
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.625 INCHES IN
NUT DIAMETER2.106 INCHES NOMINAL IN
UNDERCUT THICKNESS0.100 INCHES NOMINAL IN
NUT THICKNESS0.312 INCHES NOMINAL IN
DRIVE POINT QUANTITY8
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy S6135-20053-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6135-20053-12?
S6135-20053-12 is a NUT,PLAIN,ROUND.
What is the NSN for S6135-20053-12?
S6135-20053-12 is cataloged in the U.S. Government catalog under NSN 5310-00-723-6060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6135-20053-12