PartsTable
Technical Data Sheet
Download PDF

S6135-20053-019 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S6135-20053-019: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, nut_style: ROUND, nut_diameter: 3.156 INCHES NOMINAL IN, thread_class: 3B, nut_thickness: 0.500 INCHES NOMINAL IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-853-9017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6135-20053-019
NSN: 5310-00-853-9017
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
nut_styleROUND
nut_diameter3.156 INCHES NOMINAL IN
thread_class3B
nut_thickness0.500 INCHES NOMINAL IN
thread_seriesUN
hardness_rating26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL OVERALL
drive_point_width0.250 INCHES NOMINAL IN
small_end_diameter3.074 INCHES NOMINAL IN
undercut_thickness0.100 INCHES NOMINAL IN
NSN5310-00-853-9017
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S6135-20053-019 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
•
HOLE CONFIGURATION STYLE: CONFIGURATION F
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,COND D MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT WIDTH: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.751 INCHES IN
•
NUT DIAMETER: 3.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM
HOLE CONFIGURATION STYLECONFIGURATION F
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND D MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT WIDTH0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.751 INCHES IN
NUT DIAMETER3.156 INCHES NOMINAL IN
UNDERCUT THICKNESS0.100 INCHES NOMINAL IN
NUT THICKNESS0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6135-20053-019?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6135-20053-019?
S6135-20053-019 is a NUT,PLAIN,ROUND.
What is the NSN for S6135-20053-019?
S6135-20053-019 is cataloged in the U.S. Government catalog under NSN 5310-00-853-9017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6135-20053-019

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.