PartsTable
Technical Data Sheet
Download PDF

S6132-80172-1 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6132-80172-1: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include knuckle_type: FRICTION, overall_length: 5.400 INCHES NOMINAL IN, performance_type: NOT RATED, surface_treatment: UNABLE TO DECODE, reversible_feature: NOT INCLUDED, mounting_hole_diameter: 0.098 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-828-9742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6132-80172-1
NSN: 5340-00-828-9742
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
knuckle_typeFRICTION
overall_length5.400 INCHES NOMINAL IN
performance_typeNOT RATED
surface_treatmentUNABLE TO DECODE
reversible_featureNOT INCLUDED
mounting_hole_diameter0.098 INCHES NOMINAL IN
mounting_hole_quantity5
knuckle_inside_diameter0.120 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
NSN5340-00-828-9742
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6132-80172-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 5
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 0.120 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
•
KNUCKLE TYPE: FRICTION
•
PERFORMANCE TYPE: NOT RATED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY5
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER0.120 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
OVERALL LENGTH5.400 INCHES NOMINAL IN
SURFACE TREATMENTUNABLE TO DECODE
KNUCKLE TYPEFRICTION
PERFORMANCE TYPENOT RATED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy S6132-80172-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6132-80172-1?
S6132-80172-1 is a HINGE,BUTT.
What is the NSN for S6132-80172-1?
S6132-80172-1 is cataloged in the U.S. Government catalog under NSN 5340-00-828-9742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6132-80172-1