PartsTable
Technical Data Sheet
Download PDF

S6132-62105-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6132-62105-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.205 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.750 INCHES NOMINAL IN, overall_length: 1.750 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIALS, style_designator: NON-CIRCULAR, aperture_diameter: 1.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-226-3467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6132-62105-1
NSN: 5330-00-226-3467
NIINs: 002263467, 015159284
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
hole_diameter0.205 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.750 INCHES NOMINAL IN
overall_length1.750 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIALS
style_designatorNON-CIRCULAR
aperture_diameter1.312 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.219 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
outside_edge_to_bolt_hole_center_distance_along_width0.219 INCHES NOMINAL IN
NSN5330-00-226-3467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6132-62105-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-A-7021,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.312 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-7021,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH1.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.750 INCHES NOMINAL IN
APERTURE DIAMETER1.312 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
HAZMAT per U.S. Government catalogNo demilitarization required
Ready to buy S6132-62105-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6132-62105-1?
S6132-62105-1 is a GASKET.
What is the NSN for S6132-62105-1?
S6132-62105-1 is cataloged in the U.S. Government catalog under NSN 5330-00-226-3467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6132-62105-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.