PartsTable
Technical Data Sheet
Download PDF

S6130-80220 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6130-80220: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 2.625 INCHES NOMINAL IN, overall_length: 2.625 INCHES NOMINAL IN, aperture_diameter: 1.500 INCHES NOMINAL IN, fsc_application_data: FUSELAGES,AIRFRAME, outside_corner_radius: 0.375 INCHES NOMINAL IN, center_to_center_distance_between_bolt_holes_along_width: 1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-730-4060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6130-80220
NSN: 5330-00-730-4060
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
overall_width2.625 INCHES NOMINAL IN
overall_length2.625 INCHES NOMINAL IN
aperture_diameter1.500 INCHES NOMINAL IN
fsc_application_dataFUSELAGES,AIRFRAME
outside_corner_radius0.375 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-730-4060
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6130-80220 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: FUSELAGES,AIRFRAME
•
APERTURE DIAMETER: 1.500 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAFUSELAGES,AIRFRAME
OVERALL LENGTH2.625 INCHES NOMINAL IN
OVERALL WIDTH2.625 INCHES NOMINAL IN
APERTURE DIAMETER1.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
1000Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6130-80220?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6130-80220?
S6130-80220 is a GASKET.
What parts can replace S6130-80220?
There is 1 known substitute for S6130-80220: 1000. Substitute compatibility should be verified for your specific system.
What is the NSN for S6130-80220?
S6130-80220 is cataloged in the U.S. Government catalog under NSN 5330-00-730-4060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6130-80220

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.