PartsTable
Technical Data Sheet
Download PDF

S6130-80041-2 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S6130-80041-2: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, hardness_rating: 60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: RADIUS, surface_treatment: CADMIUM OVERALL, pin_overall_length: 0.490 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-682-7554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6130-80041-2
NSN: 5315-00-682-7554
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 4A014 — RICHARD MANUFACTURING CO., INC. DBA RICHARD MANUFACTURING CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
hardness_rating60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleRADIUS
surface_treatmentCADMIUM OVERALL
pin_overall_length0.490 INCHES NOMINAL IN
pin_overall_diameter0.1250 INCHES NOMINAL IN
first_end_taper_angle5.00 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
second_end_corner_radius0.051 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-682-7554
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S6130-80041-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER ANGLE: 5.00 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.1250 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 0.490 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
HARDNESS RATING60.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER ANGLE5.00 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1250 INCHES NOMINAL IN
PIN OVERALL LENGTH0.490 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SURFACE TREATMENTCADMIUM OVERALL
SECOND END STYLERADIUS
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6130-80041-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6130-80041-2?
S6130-80041-2 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for S6130-80041-2?
S6130-80041-2 is cataloged in the U.S. Government catalog under NSN 5315-00-682-7554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6130-80041-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.