PartsTable
Technical Data Sheet
Download PDF

S6130-63023-2 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6130-63023-2: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.244 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.750 INCHES NOMINAL IN, aperture_width: 3.250 INCHES NOMINAL IN, overall_length: 6.719 INCHES NOMINAL IN, aperture_length: 5.219 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-700-3160, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6130-63023-2
NSN: 5330-00-700-3160
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 AND RUBBER SYNTHETIC OVERALL
hole_diameter0.244 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.750 INCHES NOMINAL IN
aperture_width3.250 INCHES NOMINAL IN
overall_length6.719 INCHES NOMINAL IN
aperture_length5.219 INCHES NOMINAL IN
gage_ring_thickness0.090 INCHES NOMINAL IN
cross-sectional_thickness0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
material_document_and_classificationQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-700-3160
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6130-63023-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
GAGE RING THICKNESS: 0.090 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
APERTURE WIDTH: 3.250 INCHES NOMINAL IN
•
APERTURE LENGTH: 5.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
GAGE RING THICKNESS0.090 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH6.719 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH4.750 INCHES NOMINAL IN
APERTURE WIDTH3.250 INCHES NOMINAL IN
APERTURE LENGTH5.219 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061 AND RUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.244 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
042660Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6130-63023-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6130-63023-2?
S6130-63023-2 is a GASKET.
What parts can replace S6130-63023-2?
There is 1 known substitute for S6130-63023-2: 042660. Substitute compatibility should be verified for your specific system.
What is the NSN for S6130-63023-2?
S6130-63023-2 is cataloged in the U.S. Government catalog under NSN 5330-00-700-3160. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6130-63023-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.