PartsTable
Technical Data Sheet
Download PDF

S6126-50104-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6126-50104-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 BODY, end_radius: 1.125 INCHES NOMINAL IN, fork_depth: 1.500 INCHES NOMINAL IN, hole_diameter: 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, fork_span_width: 0.895 INCHES MINIMUM AND 0.896 INCHES MAXIMUM IN, overall_diameter: 3.181 INCHES MINIMUM AND 3.183 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-906-2194, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6126-50104-1
NSN: 5340-00-906-2194
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 BODY
end_radius1.125 INCHES NOMINAL IN
fork_depth1.500 INCHES NOMINAL IN
hole_diameter0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
fork_span_width0.895 INCHES MINIMUM AND 0.896 INCHES MAXIMUM IN
overall_diameter3.181 INCHES MINIMUM AND 3.183 INCHES MAXIMUM IN
style_designatorCLEVIS
surface_treatmentANODIZE BODY
fork_arm_thickness0.300 INCHES NOMINAL IN
rod_connection_bore_depth4.120 INCHES NOMINAL IN
rod_connection_bore_diameter2.875 INCHES NOMINAL IN
material_document_and_classificationQQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE BODY
NSN5340-00-906-2194
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6126-50104-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.895 INCHES MINIMUM AND 0.896 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.300 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BODY
•
OVERALL DIAMETER: 3.181 INCHES MINIMUM AND 3.183 INCHES MAXIMUM IN
•
END RADIUS: 1.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE BODY
•
SURFACE TREATMENT: ANODIZE BODY
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.895 INCHES MINIMUM AND 0.896 INCHES MAXIMUM IN
FORK ARM THICKNESS0.300 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BODY
OVERALL DIAMETER3.181 INCHES MINIMUM AND 3.183 INCHES MAXIMUM IN
END RADIUS1.125 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE BODY
SURFACE TREATMENTANODIZE BODY
ROD CONNECTION BORE DIAMETER2.875 INCHES NOMINAL IN
ROD CONNECTION BORE DEPTH4.120 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6126-50104-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6126-50104-1?
S6126-50104-1 is a CLEVIS,ROD END.
What is the NSN for S6126-50104-1?
S6126-50104-1 is cataloged in the U.S. Government catalog under NSN 5340-00-906-2194. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6126-50104-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.