PartsTable
Technical Data Sheet
Download PDF

S6120-76245-2 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6120-76245-2: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4640 OVERALL, end_radius: 0.580 INCHES NOMINAL IN, fork_depth: 0.880 INCHES NOMINAL IN, hole_diameter: 0.5615 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN, fork_span_width: 0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN, overall_diameter: 1.311 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-006-8021, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6120-76245-2
NSN: 5340-00-006-8021
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 4640 OVERALL
end_radius0.580 INCHES NOMINAL IN
fork_depth0.880 INCHES NOMINAL IN
hole_diameter0.5615 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
fork_span_width0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
overall_diameter1.311 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
style_designatorCLEVIS
fork_arm_thickness0.155 INCHES NOMINAL IN
metallic_hardness_rating34.0 MINIMUM ROCKWELL C AND 38.0 MAXIMUM ROCKWELL C
material_document_and_classificationMIL-S-16974 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end4.160 INCHES NOMINAL IN
NSN5340-00-006-8021
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6120-76245-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.155 INCHES NOMINAL IN
•
OVERALL DIAMETER: 1.311 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
END RADIUS: 0.580 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-16974 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 4640 OVERALL
•
METALLIC HARDNESS RATING: 34.0 MINIMUM ROCKWELL C AND 38.0 MAXIMUM ROCKWELL C
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
FORK ARM THICKNESS0.155 INCHES NOMINAL IN
OVERALL DIAMETER1.311 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
END RADIUS0.580 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-16974 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4640 OVERALL
METALLIC HARDNESS RATING34.0 MINIMUM ROCKWELL C AND 38.0 MAXIMUM ROCKWELL C
FORK DEPTH0.880 INCHES NOMINAL IN
HOLE DIAMETER0.5615 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy S6120-76245-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6120-76245-2?
S6120-76245-2 is a CLEVIS,ROD END.
What is the NSN for S6120-76245-2?
S6120-76245-2 is cataloged in the U.S. Government catalog under NSN 5340-00-006-8021. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6120-76245-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.