PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S611ASSEMBLY1
S611ASSEMBLY1 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The STRAINER,SEDIMENT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 SCREENING, body_height: 22.750 INCHES NOMINAL IN, body_length: 25.375 INCHES NOMINAL IN, temp_rating: 556.0 FAHRENHEIT NOMINAL DEGF, special_features: FOR LEFT HAND APPLICATION, style_designator: INLINE DISPOSAL W/THREADED CONNECTIONS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-123-4130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S611ASSEMBLY1
NSN: 4730-01-123-4130
FSC: 4730
CAGE: 93591 — PENTAIR VALVES & CONTROLS US LP DIV FLOW CONTROL US HOLDING CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 410 SCREENING
body_height22.750 INCHES NOMINAL IN
body_length25.375 INCHES NOMINAL IN
temp_rating556.0 FAHRENHEIT NOMINAL DEGF
special_featuresFOR LEFT HAND APPLICATION
style_designatorINLINE DISPOSAL W/THREADED CONNECTIONS
operating_pressure1100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
media_for_which_designedANY ACCEPTABLE
NSN4730-01-123-4130
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: S611ASSEMBLY1 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 556.0 FAHRENHEIT NOMINAL DEGF
•
MATERIAL: STEEL COMP 410 SCREENING
•
MEDIA FOR WHICH DESIGNED: ANY ACCEPTABLE
•
OPERATING PRESSURE: 1100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
BODY LENGTH: 25.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: INLINE DISPOSAL W/THREADED CONNECTIONS
•
BODY HEIGHT: 22.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING556.0 FAHRENHEIT NOMINAL DEGF
MATERIALSTEEL COMP 410 SCREENING
MEDIA FOR WHICH DESIGNEDANY ACCEPTABLE
SPECIAL FEATURESFOR LEFT HAND APPLICATION
OPERATING PRESSURE1100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
BODY LENGTH25.375 INCHES NOMINAL IN
STYLE DESIGNATORINLINE DISPOSAL W/THREADED CONNECTIONS
BODY HEIGHT22.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
103326Interchangeable
interchangeable cross-reference
interchangeable
MS35338-13Interchangeable
interchangeable cross-reference
interchangeable
130MAW1Interchangeable
interchangeable cross-reference
interchangeable
M5-11Interchangeable
interchangeable cross-reference
interchangeable
S7-11Interchangeable
interchangeable cross-reference
interchangeable
177033-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S611ASSEMBLY1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S611ASSEMBLY1?
S611ASSEMBLY1 is a STRAINER,SEDIMENT.
What parts can replace S611ASSEMBLY1?
There are 12 known substitutes for S611ASSEMBLY1: 103326, MS35338-13, 130MAW1 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S611ASSEMBLY1?
S611ASSEMBLY1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-123-4130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S611ASSEMBLY1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026