PartsTable
Technical Data Sheet
Download PDF

S6110-23316-1 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6110-23316-1: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, housing_bore_diameter: 3.936 INCHES MINIMUM AND 3.939 INCHES MAXIMUM IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 3.2495 INCHES MINIMUM AND 3.2500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-058-6712, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6110-23316-1
NSN: 5330-00-058-6712
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
housing_bore_diameter3.936 INCHES MINIMUM AND 3.939 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter3.2495 INCHES MINIMUM AND 3.2500 INCHES MAXIMUM IN
NSN5330-00-058-6712
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6110-23316-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 3.936 INCHES MINIMUM AND 3.939 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.2495 INCHES MINIMUM AND 3.2500 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER3.936 INCHES MINIMUM AND 3.939 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER3.2495 INCHES MINIMUM AND 3.2500 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
CB76-27Reference document
Same NSN cross-reference
Reference document — Secondary reference
S6110-23316Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6110-23316-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6110-23316-1?
S6110-23316-1 is a SEAL,PLAIN ENCASED.
What parts can replace S6110-23316-1?
There are 2 known substitutes for S6110-23316-1: CB76-27, S6110-23316. Substitute compatibility should be verified for your specific system.
What is the NSN for S6110-23316-1?
S6110-23316-1 is cataloged in the U.S. Government catalog under NSN 5330-00-058-6712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6110-23316-1