PartsTable
Technical Data Sheet
Download PDF

S6110-23093 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S6110-23093: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, surface_treatment: ANODIZE CASE, housing_bore_diameter: 3.872 INCHES MINIMUM AND 3.878 INCHES MAXIMUM IN, sealing_element_style: ANGULAR-EXTERNAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-573-0488, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S6110-23093
NSN: 5330-00-573-0488
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A
case_styleSQUARE
seal_width0.250 INCHES NOMINAL IN
surface_treatmentANODIZE CASE
housing_bore_diameter3.872 INCHES MINIMUM AND 3.878 INCHES MAXIMUM IN
sealing_element_styleANGULAR-EXTERNAL
accommodated_shaft_diameter3.436 INCHES MINIMUM AND 3.438 INCHES MAXIMUM IN
material_document_and_classification9100 FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT B
NSN5330-00-573-0488
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S6110-23093 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR-EXTERNAL
•
HOUSING BORE DIAMETER: 3.872 INCHES MINIMUM AND 3.878 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 9100 FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT A
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.436 INCHES MINIMUM AND 3.438 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR-EXTERNAL
HOUSING BORE DIAMETER3.872 INCHES MINIMUM AND 3.878 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION9100 FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT A
MATERIAL DOCUMENT AND CLASSIFICATION9100 FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE SEALING ELEMENT B
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER3.436 INCHES MINIMUM AND 3.438 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE CASE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT B
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
27608-8601Reference document
Same NSN cross-reference
Reference document — Secondary reference
B14039-27608-8601Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S6110-23093?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S6110-23093?
S6110-23093 is a SEAL,PLAIN ENCASED.
What parts can replace S6110-23093?
There are 2 known substitutes for S6110-23093: 27608-8601, B14039-27608-8601. Substitute compatibility should be verified for your specific system.
What is the NSN for S6110-23093?
S6110-23093 is cataloged in the U.S. Government catalog under NSN 5330-00-573-0488. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S6110-23093

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.